New Arrivals

1 Piece Design, Includes Mounting Brackets & Fillers..yy

10 Foot Length / Roll, Diameter : 4", Stainless Steel..yy

Universal York/Tecumseh Style Clutch ,8 Groove , Voltage: 12 , Clutch Diameter: 6.14" (156 mm) , Dou..yy

2 Groove , Voltage: 12 , Clutch Diameter: 6" (152.4 mm) , Groove Width: 0.50" , Fitting Size: 1"-14 ..yy

8 Groove , Voltage: 1 , Clutch Diameter: 6.125" (155.58 mm) , Groove Width: 0.014" , Fitting Size: ..yy

8 Groove , Voltage: 12 , Sanden Style 4417 , Clutch Diameter: 4.7" (119 mm) , Direct Mount , 2 Wire ..yy

Hose Side Fittings , Inlet: #6 (3⁄8”) Female O-Ring , Outlet: #12 (5⁄8”) Female, O-Ring , Evaporator..yy

Fitting Connector: M10-1.25 , High- Open: 28 PSI Closed: 370 PSI , Low- Open: 455 PSI Closed: 30 PSI..yy

Sight Glass & Service Valve Top , Inlet: #6 Male O-Ring , Outlet: #6 Female O-Ring , M10 x 1.25mm Sc..yy

Fitting: #6 O-Ring Male , High Capacity, Pressure Relief , Switch Port : Top , Moisture Indicator: 2..yy

Dimensions- 10 1/2" X 10 1/2" X 3/4"..yy

Single Speed, 12 Volt , Rotates CW , Plate Mounted , Dimensions: 4” X 3 5⁄8” X 3” , Shaft- Diameter:..yy

Quick Disconnect Inlet & Outlet , 7/16" Schrader Valves , High Capacity , Pressure Relief , Switch P..yy

Taper Length: 1.080" , Sm Taper Diameter: 0.967" , Stud Center To Rod End: 10.32" , Stud Thread Size..yy

Taper Length: 1.080" , Sm Taper Diameter: 0.967" , Stud Center To Rod End: 10.32" , Stud Thread Size..yy

Rear Hub Cover Set, 33mm..yy

Height: 15.354" , Inside Diameter: 6.811" , Outside Diameter: 13.13"..yy

11 Ga...yy

For Use W/ 2 1/2 Ton M35A2 & M54A2 Models..yy

Cummins NH, NT & NTC Non-FFC Engine Models , Made In U.S.A...yy

Cummins Engine Models NH250..yy

Works w/ Defrost Vent..yy

C101 & C102 Pumps..yy

Works W/ S-20295 (B65-1008) ,O.D.: 44.5mm..yy

Works W/ S-20278 & 4" Wide Front Suspension Springs , O.D.: 52.8mm..yy